How would I go about manufacturing this part?

[atomictank2001]

I'm fairly certain this wouldn't be made out of 1 piece of sheet metal, so what would be the best way to manufacture this? What machinery/processes would I use, and how would I go about bending all the metal?

Below are a few pictures of the part along with a download link to the STEP file. The part uses 0.75 mm (22-23 gauge) mild steel.

**link removed**

4 views.PNG

section.PNG

[Kelly_Bramble]

What volume/many are needed? 3D sintering (metal) printing or high volume casting with post machining.

[atomictank2001]

I only need 1, possibly more in the distant future but definitely no type of rapid manufacturing needed.

[Kelly_Bramble]

One might able to machine it..

[alice_r]

0.75 mm (22-23 gauge) mild steel -- That would be tricky to machine on a lathe. It might not seem to you, but it could be done on a deep draw press in production. Depending on the application, if you have an option to play with the dimensions (thickness) than we can think of different ways to machine it.

[ishmaeldada]

For the upper cylindrical part, fold it around a die of desired dimensions

For the conical part, stary with a flat sheet metal, punch the holes in their appropriate locations, deep draw it with a die of the right shape, then join all pieces with bolts, or welding. Joining process will depend on end usage of part