Results 1 to 6 of 6

Thread: Die Cast or Machined Parts?

  1. #1
    Associate Engineer
    Join Date
    Jul 2018
    Location
    Hudson NH
    Posts
    7

    Confused Die Cast or Machined Parts?

    Hi Guys,

    I'm working on side design job. I got of couple parts and I would like to convince my client to die cast these parts.

    500 pieces I can't see machining all of these parts. They are going into a Humvee project....robust is essential.

    Is there much of a cost difference between the 2? Specially with tariffs and stuff. I will probably quote both versions,

    Thanks

    Marky
    Attached Images Attached Images

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    500 pieces? The tooling + process development is probably over 100K. Do the math, moreover lead time is way longer with die casting.

    You need quotes for both processes..
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Another consideration is whether the die-cast parts are adequate in the as-cast condition. If machine allowance is required on the casting and then post-machining to achieve accuracy in selected mating features this is another line item in the costing.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  4. #4
    Associate Engineer
    Join Date
    Jul 2018
    Location
    Hudson NH
    Posts
    7
    Thanks Kelly.....I just don't want my client to dive into machined parts when we've got another option. I can finish machine areas on the casting to get a nice finish. I'll quote both ways.

  5. #5
    Principle Engineer
    Join Date
    May 2015
    Posts
    216
    Why not a laser cut flat panel from sheet stock and some flush mount rocker switches. No tooling required and safer with no projections off the side panels.

  6. #6
    Associate Engineer
    Join Date
    Jul 2018
    Location
    Hudson NH
    Posts
    7
    Great Idea!! Thanks Hudson I'm old school....end mills and stuff.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •