Results 1 to 2 of 2

Thread: Threads on hardened 52100 steel

  1. #1
    Associate Engineer
    Join Date
    Jul 2019
    Posts
    1

    Threads on hardened 52100 steel

    The component is made out of 52100 steel with 5/16-24 threads, then through hardened to 60 HRC. Will the threads become brittle and breaks when tightened?

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Typically, 52110 chrome steel is used in bearing and bearing components.


    I'm sure you can thread the material though I doubt it is easy and I doubt you would have too much problems it if properly torqued. here's a rod-end made from 52100.

    20F975_AS01.jpg
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •