Results 1 to 3 of 3

Thread: Air tanks in parallel and series

  1. #1
    Associate Engineer
    Join Date
    Jul 2019
    Posts
    2

    Air tanks in parallel and series

    Ive seen parallel air tanks on the internet, and you get increased parallel volume from them, but if you connect them charge inlet to outlet, inlet to outlet, in a series connection - do you get increased psi?
    Also what about pumps in series - is there increased force?

    Im a little doubtful, because it doesnt seem to be on the internet, and im going to do some self experimenting as well, but can anyone give me some advice on this, Id be very grateful, thanks.

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Compressed air tanks in parallel is mostly the same as in series... It's just piping.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Associate Engineer
    Join Date
    Jul 2019
    Posts
    2
    Thanks for reply.

    Yes, there doesnt seem to be enough difference to quantify anything different happening, having the tanks connected in series just makes for 1 bigger air tank, its no different.

    I read more on the internet, and im happy to say pumps in series is different from parallel, because they are making vaccums for each other, so it could possibly be true they run with less resistance in series, but it doesnt seem to be true for air tanks.
    Last edited by rouncer81; 07-26-2019 at 06:41 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •