Results 1 to 5 of 5

Thread: catamaran building

  1. #1

    catamaran building

    ok here goes im new here. Im wanting to build a 12'x32' catamaran out of aluminum and Id like some advise.
    what thickness wall and tube size should I use? not sure on strength.....

  2. #2
    Principle Engineer Cragyon's Avatar
    Join Date
    Feb 2013
    Location
    Newark, NJ
    Posts
    299
    Don't think you're going to get everything you need from a forum...

    You are asking for alot.

  3. #3
    Technical Fellow jboggs's Avatar
    Join Date
    Mar 2011
    Location
    Myrtle Beach, SC
    Posts
    908
    Thick enough and big enough to carry your anticipated loads. But not so big as to be too heavy.

    Solved.

    Next question?

    Seriously, maybe you thought you were asking a simple question. You were not. A little more definition, no, a LOT more definition would be required.

  4. #4
    Ok sorry guys. Not sure what size and thickness of square tubing to use and thickness for skin on hull. 6-8 people so like 3000 lbs max .for people and gear.

  5. #5
    Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    I don't think you understand that your question does not have a simple answer. The hull and associated structural members of a boat is more complicated then "xxx" thickness.

    Really...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •