Reply With QuoteIt's not standard to anything - you'll have to have one machined.
Hi,
I have been looking for something off the shelf for a while now and not been able to find anything suitable, i assume its due to the tricky thread? The external thread needs to be 3/4-32, however i do not mind if its fully threaded or only up to 5mm. The ID does not need to be threaded, only requirement is its 12mm minimum . The taper is not required, i can do that myself.
Please shout out if anyone has anything in mind that would be suitable.
Cheers,
A
Last edited by adaml_509; 03-03-2020 at 05:07 AM.
It's not standard to anything - you'll have to have one machined.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Yeah i thought so, thanks.
