Bushing with 3/4-32 thread

[adaml_509]

Hi,

I have been looking for something off the shelf for a while now and not been able to find anything suitable, i assume its due to the tricky thread? The external thread needs to be 3/4-32, however i do not mind if its fully threaded or only up to 5mm. The ID does not need to be threaded, only requirement is its 12mm minimum . The taper is not required, i can do that myself.

Please shout out if anyone has anything in mind that would be suitable.

Cheers,
A

[Kelly_Bramble]

It's not standard to anything - you'll have to have one machined.

[adaml_509]

Yeah i thought so, thanks.