Results 1 to 2 of 2

Thread: 2Way datum hole profile tolerance

  1. #1

    Join Date
    Mar 2021
    Posts
    1

    2Way datum hole profile tolerance

    IMG_2249.jpg

    Can any one help me to find Go/No Go size for plug gauge for 2way datum slot based on the drawing please?

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Profile of surface tolerance by default is bi-lateral equal (half to the inside and half to the outside of the profile).

    Therefore, a perfect world go gage size is an oblong shape (15 - 0.1) x (8 - 0.1) usually + a small gage tolerance.

    A perfect world no-go gage (15 + 0.1 x 8 + 0.1) - a small gage tolerance.

    However, there are scenario's where these gages will not detect an out of tolerance condition.

    In the old days a transparency with the inner and outer boundary tolerance zones printed on was placed on a lighted surface and the as-built pert/feature verified to be within the transparency gage tolerance lines.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •