Results 1 to 4 of 4

Thread: How to calculate the damping on a cylinder

  1. #1
    Associate Engineer
    Join Date
    Dec 2021
    Posts
    5

    How to calculate the damping on a cylinder

    1000 psi of fluid acts on the head of the shuttle from the right , compression the spring . There are small bypass holes in array around the cylinder to help dampen the force. My question is, how do I calculate the damping effect. where do I start ? Please see attachment above.
    Attached Images Attached Images

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Here's Page on shock absorbers.

    https://www.engineersedge.com/hydrau...-absorbers.htm

    Also here's a spring with damping effects simulator and associated formulas.

    https://www.engineersedge.com/calcul...-simulator.htm
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Associate Engineer
    Join Date
    Dec 2021
    Posts
    5
    Many thanks

  4. #4
    New Member
    Join Date
    Nov 2022
    Posts
    1
    Reduction of the piston velocity at one or both ends of the stroke to reduce mass forces. If the ends of the stroke are at the end positions of the piston, end position damping is used, which requires design measures on the cylinder (Figure D 2).
    Calculate the damping ratio: The damping ratio formula is ζ=c2√(km) ζ = c 2 ( k m ).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •