Results 1 to 2 of 2

Thread: Nylon Torque Theory

  1. #1
    Associate Engineer
    Join Date
    Oct 2022
    Posts
    1

    Nylon Torque Theory

    I am trying to understand the Torque Values shown for nylon on this table
    https://www.engineersedge.com/torque_table_sae.htm

    Is the values shown the Maximum Torque for the Fastener itself before the head of the fastener breaks off or the threads for the hole stripping out?

    Any help with this would be greatly appreciated!

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    The values shown are the target torque for the material. For example, if a .250-20 UNC the target torque threading into Nylon 16 in-lbs.

    If you go to the torque design web page you'll find webpages that will help you estimate stripping torque

    Also see


    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •