The AB-1 is equipped with energy-efficient induction heating power supplies and a four- or six-position indexing table for easy loading and unloading. The system can be configured with up to three brazing stations (depending on process requirements) as well as robotic part loading and unloading. Brazing cycle times are typically less than 20 seconds per part, as fast as three seconds per part or 4800 parts per hour. Front panel start/stop push buttons place the system in a PLC-controlled auto run mode with full manual control available for process development. The unit is completely self-contained with a built-in water-to-air heat exchanger.

"This new brazing system will truly facilitate continuous flow manufacturing", said IA President Steve Skewes. "With the AB-1, our customers can move their brazing process away from a centralized work area, directly into the manufacturing cell."