Membership Services

Re: Re: Pressure Vessel

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">Jim Crowley on March 13, 2002 at 11:58:29:

In Reply to: Re: Pressure Vessel posted byCT Rogers on December 08, 2001 at 09:17:35:

There is a restriction for these formulas.
The criteria is listed in the Pressure code.
Circumferential - P does not exceed .385SE

Longitudinal - P does not exceed 1.25SE

Most cases no problem, but one should check regularly in order to avoid a problem.

Follow Ups

Subject: Re: Re: Re: Pressure Vessel

Comments:: There is a restriction for these formulas. : The criteria is listed in the Pressure code. : Circumferential - P does not exceed .385SE : Longitudinal - P does not exceed 1.25SE : Most cases no problem, but one should check regularly in order to avoid a problem.

[ Home ][ Forum Archive ] [ Active Engineering Forum ]