Membership Services

Re: Gearbox Design

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">Randy Kimball on October 07, 2002 at 20:00:29:

In Reply to: Gearbox Design posted byMark Donnelly on October 06, 2002 at 04:39:56:

Anyway you figure it two shafts, six shafts,
you have 9 times the torque and a 9-1 gear ratio
if you have and input of 1440 RPM into gear reduction
box out-putting 160 RPM. 1440/160=9

Follow Ups

Subject: Re: Re: Gearbox Design

Comments:: Anyway you figure it two shafts, six shafts, : you have 9 times the torque and a 9-1 gear ratio : if you have and input of 1440 RPM into gear reduction : box out-putting 160 RPM. 1440/160=9

[ Home ][ Forum Archive ] [ Active Engineering Forum ]