Posted by: volod ® 06/18/2003, 20:23:35 Author Profile eMail author Edit

I am trying to enter HVAC field and I want to find a tutor (designer or engineer) for lessons. Can somebody tell me how much I should offer per hour (approximately)

Replies to this message

Re: How much would lessons cost?
Re: How much would lessons cost? -- volod	Post Reply	Top of thread	Forum

Posted by: Cragyon ® 06/19/2003, 12:22:32 Author Profile eMail author Edit

Sounds like you need to go to a HVAC trade school or equivalent. Is there a scholl around where you live?

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

HVAC tutor?
Re: How much would lessons cost? -- volod	Post Reply	Top of thread	Forum

Posted by: RKimball ® 06/18/2003, 23:36:08 Author Profile eMail author Edit

You wish to be tutored in what aspect of the HVAC industry. This is a vast field comprised of many aspects. Air conditioning, heating, acoustical, ducts, dampers, louvers, heat losses, inspection, fire proofing, smoke proofing, control systems, fan air movement/fan sizing, local/state/national codes .. the list is vast. ..generally (if you can find it) tutoring of any kind by my experience goes at $20 to $35 per hour American. I suggest you seek out a book first, and a code book on the subject of your choice is a great start. ..... Warning, the code books for the national HVAC industry will fill a good sized shelf. .. FYI ... a couple of years ago Dallas hosted the national HVAC convention. Dallas hosts many industrial conventions, the HVAC convention was the largest industrial group they ever provided a convention site for. -randy- ** The worst suggestion of your lifetime may be the catalyst to the grandest idea of the century, don't fail to listen to suggestions. -randy- Modified by RKimball at Wed, Jun 18, 2003, 23:40:44

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

| |

Re: HVAC tutor?
Re: HVAC tutor? -- RKimball	Post Reply	Top of thread	Forum

Posted by: boondockrican ® 04/01/2007, 17:03:43 Author Profile eMail author Edit

I am in a trade school for HVAC and i recently just passed the written examination. The new practical examinations are on the computers, there are no longer proctors. How can I find someone to tutor me? im in the new york area

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

Re: HVAC tutor?
Re: HVAC tutor? -- RKimball	Post Reply	Top of thread	Forum

Posted by: volod ® 06/19/2003, 19:56:39 Author Profile eMail author Edit

Thank you very much for your replies! Thank you very much for your replies! I am a foreign trained engineer - designer of HVAC systems for buildings and I want to study how it is done in North America. I have noticed that most solutions for HVAC systems here and in my home country (Ukraine) are different. I have read some books from university library but I also need some guidance from a mentor. My problem is that I've given advertisements in most newspapers offering $25/hr but have not received any answer. May be you can also suggest me where else I can put advertisements. Thanks.

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

| |