Design and Engineering Forum
[Home] [Design Resources] [Technology Store]
[Archive#1] [Archive #2] [Archive #3] [Calculators]

Material selection: plastic or metal? Question
Post Reply   Forum
Posted by: Joe ®

02/02/2004, 12:20:21

Author Profile Mail author Edit

Hi:

I'm designing a tape dispenser for polycarbonate sheets sealing. It's quite specific so the amount of products that they will be manufactured they will be 500, and then 100 each year (depending). The dispenser will be hand held, with an air gun incorporated. The size overall, will be 20x10x6 cm.

The main constrains are the weight (due to ergonomic data) and the cost (maximum manufacturing price of the product it will be 100£).

Thinking in applying:

-PP: Light, easy to manufacture, plastic assemblies, appearance, touch.

-Stainless steel: Maybe the 410. Cheaper when that amount of pieces are required?

Which could I apply? Anybody knows where could I ask cost for each process?

Thank you very much, Joe.







Post Reply | Recommend | Alert Rate View All   | Next |

Replies to this message


Re: Material selection: plastic or metal?
Re: Material selection: plastic or metal? -- Joe Post Reply Top of thread Forum
Posted by: RandyKimball ®
Barney
02/02/2004, 19:47:22

Author Profile Mail author Edit
Joe,
Basicly you need to work up the concept in both plasitc and steel. Then you need to go out for quotes for the tooling to make it both ways letting the vendors know you only want bracketed cost estimates. This means you ask for a cost spread that the vendor thinks the cost would fall within. You do this to save the vendor from spending more time on the estimate then they should for a job that is only a feeler. If you don't do this, it won't be long until the vendors will no quote all your work because they can't possibly afford to quote all the "wolf cries" (false quotes). So be up front and you should get a reasonable value to work with. Most vendors can give you a fairly close guess if you encourage then to bracket the estimate.
-randy-



The worst suggestion of you lifetime may be the catalyst to the grandest idea of the century, never let suggestions go unsaid nor fail to listen to them.


Post Reply | Recommend | Alert Rate Where am I? Original Top of thread

Powered by Engineers Edge

© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved.  Disclaimer