Rust preveantive for a steel
	Post Reply		Forum

Replies to this message

Re: Rust preveantive for a steel
Re: Rust preveantive for a steel -- wedge	Post Reply	Top of thread	Forum

Posted by: Cragyon ® 03/04/2004, 15:13:36 Author Profile Mail author Edit

I know that if you get rid of the oxygen, then you will stop the corrosion.  Often in aerospace, we use Zinc Chomate or equivalent primer to seal bare metal against the elements.

Post Reply | Recommend | Alert

Rate

Where am I? Original Top of thread

| |

Re:Rust preveantive for a steel
Re: Re: Rust preveantive for a steel -- Cragyon	Post Reply	Top of thread	Forum

Posted by: RandyKimball ® 03/04/2004, 23:26:22 Author Profile Mail author Edit

Absolutely, there is your answer, I agree. In fact we used it frequently, for the very reason the question was ask. Good show! Oh how one forgets. -randy- The worst suggestion of you lifetime may be the catalyst to the grandest idea of the century, never let suggestions go unsaid nor fail to listen to them.

Post Reply | Recommend | Alert

Rate

Where am I? Original Top of thread

Re: Rust preveantive for a steel
Re: Rust preveantive for a steel -- wedge	Post Reply	Top of thread	Forum

Posted by: RandyKimball ® 03/03/2004, 22:26:14 Author Profile Mail author Edit

.... my best shot ... I've seen this done and can only get you started with my best memory. When having aircraft parts cad plated sometimes they get damaged in handling and a portion of the cadmium gets chipped off. As I remember, there is a dob on substance that is used to touch up these areas. This may be a good possible "solution" (couldn't help myself). My best advice is to request more and better information from a platting business. You may be into your best diplomatic endeavour as you will be asking for free information from a business that makes its living rust proff processing metals for profit. Remember to ask about similar and dis-similar metal electrolysis problems from that same source, in your scenario (though, I figure this is why you want to do the process). -randy- The worst suggestion of you lifetime may be the catalyst to the grandest idea of the century, never let suggestions go unsaid nor fail to listen to them. Modified by RandyKimball at Wed, Mar 03, 2004, 22:28:02

Post Reply | Recommend | Alert

Rate

Where am I? Original Top of thread

| |