threads
	Post Reply		Forum

Replies to this message

Re: threads
Re: threads -- brelleng	Post Reply	Top of thread	Forum

Posted by: devitg ® 06/18/2004, 15:16:01 Author Profile Mail author Edit

it is called schraeder valve the Tire and Rim association have info about it According to the Tire and Rim Association (and they should know) the standard Schrader valve has the following thread 7.7 mm OD 32 tpi, or 0.794 mm pitch Minor diameter is 6.9mm Thread designation is .305-32 or 7.7-32 Nice mix of inches and millimetres! Please next time put a more specific post title. maybe it could be "tire valve threads" I had look for it  by 2002 see all what I got https://www.eng-tips.com/viewthread.cfm?SQID=13070&SPID=68&newpid=68&page=1

Post Reply | Recommend | Alert

Rate

Where am I? Original Top of thread

Re: threads
Re: threads -- brelleng	Post Reply	Top of thread	Forum

Posted by: devitg ® 06/18/2004, 15:12:02 Author Profile Mail author Edit

it is called schraeder valve the Tire and Rim association have info about it According to the Tire and Rim Association (and they should know) the standard Schrader valve has the following thread 7.7 mm OD 32 tpi, or 0.794 mm pitch Minor diameter is 6.9mm Thread designation is .305-32 or 7.7-32 Nice mix of inches and millimetres! Please next time put a more specific post title. maybe it could be "tire valve threads"

Post Reply | Recommend | Alert

Rate

Where am I? Original Top of thread

| |

Re: threads
Re: threads -- brelleng	Post Reply	Top of thread	Forum

Posted by: devitg ® 06/18/2004, 14:34:13 Author Profile Mail author Edit

What about , the next post be more specific?? Just because I'm curious on threads I open it This thread are called shreader thread profiles. It is the most aged thread profile still used in the whole industrie, it is used all around the world. Do agoogle for "schreader valves"

Post Reply | Recommend | Alert

Rate

Where am I? Original Top of thread

| |