|
Inertia / Torque / Force Calcuations, Formulas | |||
Post Reply | Forum |
Posted by: newpunkrkr ® 02/15/2006, 10:53:56 Author Profile eMail author Edit |
I've got an aluminum rectangular mass with two steel pins that I need to rotate at a high speed. It is 26" x 4.5". The aluminum weighs 46lbs, and the pins are 8.5lbs each. The pins are centered 11.25" left and right off center. I need to spin it 90 degrees in .450 sec (start and stop), via a 1 7/16" shaft mounted below in center. I'm having trouble calculating the moment of inertia and the forces/torque required to preform that operation. Any help would be appreciated. |
Post Reply | Recommend | Alert Administrator |
Powered by Engineers Edge
© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved. Disclaimer