Replies to this message

Re: Screw Jack Design
Re: Screw Jack Design -- scarface	Post Reply	Top of thread	Forum

Posted by: scarface ® 03/24/2006, 09:23:57 Author Profile eMail author Edit

Screw jack for an automobile. about 300mm I need to lift the automile. I assume the automobile 1500kg. an by hand ı lift. How can I assume the load appiled on it. And how can I make the design. ı am a mechanical engineering student and this is my project in mech. element study. Mechanical Engineering

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

Re: Screw Jack Design
Re: Screw Jack Design -- scarface	Post Reply	Top of thread	Forum

Posted by: scarface ® 03/19/2006, 09:11:40 Author Profile eMail author Edit

Thank you for information you gave. I have the book of Shigley. but ı need more information. and an exaple. I have to see one example. BBecause I have no idea about preparing an proje. Mechanical Engineering

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

| |

Re: Screw Jack Design
Re: Re: Screw Jack Design -- scarface	Post Reply	Top of thread	Forum

Posted by: devitg ® 03/20/2006, 19:55:51 Author Profile eMail author Edit

At that book there is a sample : i have a spanish translation it is at the chapter 3 problem 51 But to start a project you need all the data I ask you. The screw jack design could be the screw to be tractioned , or compressed. So make the data.

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

Re: Screw Jack Design
Re: Screw Jack Design -- scarface	Post Reply	Top of thread	Forum

Posted by: devitg ® 03/18/2006, 18:50:07 Author Profile eMail author Edit

1.- state the load 2.- the min height 3.- the max height 4.- way of operation , by hand , motor 5.- if by hand, mean of operation 6.- if by motor , wich power 7.- time to rise the load. and so on then look for on the shelf that suit the spec , and see how it is made , then understand each part action. Then grab the books and start. MECHANICAL ENGINEERING DESIGN SHIGLEY MISCHKE. Mc Graw Hill After it come here again.

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

| |