Replies to this message

Re: Removing old Labels from remanufactured product
Re: Removing old Labels from remanufactured product -- Mark A. J.	Post Reply	Top of thread	Forum

Posted by: anees0007 ® 07/14/2006, 08:01:08 Author Profile eMail author Edit

Please use hair dryer to remove the labels. This is the most effective way.

Post Reply | Tell a Friend (must be logged in) | Alert Admin About Post

Where am I? Original Top of thread

Re: Removing old Labels from remanufactured product
Re: Removing old Labels from remanufactured product -- Mark A. J.	Post Reply	Top of thread	Forum

Posted by: Marky ® 07/12/2006, 08:13:00 Author Profile eMail author Edit

You may want to try Methanol. Some light scrapeing may still be required. Use gloves while applying the Methanol. DO NOT TRY ACETONE....the label will stay but the plastic behind it will be gone...

Post Reply | Tell a Friend (must be logged in) | Alert Admin About Post

Where am I? Original Top of thread

| |

Re: Re: Removing old Labels from remanufactured product
Re: Re: Removing old Labels from remanufactured product -- Marky	Post Reply	Top of thread	Forum

Posted by: randykimball ® 07/16/2006, 23:34:15 Author Profile eMail author Edit

Have you tried a steamer as used to remove rinkles from clothes? Most of those glues are not to great in heat. Most plastic has a melting point of around 350°f and steam is just over 212°. ... be careful!.. The worst suggestion of your lifetime may be the catalyst to the grandest idea of the century, never let suggestions go unsaid nor fail to listen to them.

Post Reply | Tell a Friend (must be logged in) | Alert Admin About Post

Where am I? Original Top of thread