Posted by: maxa ® 08/02/2006, 09:01:00 Author Profile eMail author Edit

Hi all, Does anyone have a copy of a metric dowel hola data chart, with tolerances please? Thanks, Max

Replies to this message

Re: Metric Dowel Hole data
Re: Metric Dowel Hole data -- maxa	Post Reply	Top of thread	Forum

Posted by: Kelly Bramble ® 08/02/2006, 20:38:03 Author Profile eMail author Edit

You could extrapolate size and tolerance data from this webpage /dowel_pin.htm.

Post Reply | Tell a Friend (must be logged in) | Alert Admin About Post

Where am I? Original Top of thread

Re: Metric Dowel Hole data
Re: Metric Dowel Hole data -- maxa	Post Reply	Top of thread	Forum

Posted by: traingdt ® 08/02/2006, 13:12:55 Author Profile eMail author Edit

I'm not exactly sure what you're looking for, but there is a standard that addresses "Preferred Metric Limits and Fits". It lists all the codes, such as F8, e11, h7, etc., that are common fits (depending on whether it's a clearance hole or a press fit, which is probably what you want). It is published by the American Society of Mechanical Engineers (www.asme.org) but it probably has to be purchased. It is standard number ANSI B4.2-1978. John-Paul Belanger

Post Reply | Tell a Friend (must be logged in) | Alert Admin About Post

Where am I? Original Top of thread

| |