Membership Services

docks

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">Tony Annacchino on September 12, 2002 at 18:29:24:

I want to build a 3 foot wide by 70 feet long dock.
My idea was to weld aluminum angle to create 2 pieces each 70' long.I would attach a set of wheels to one end
and a hitch to the other to be able to roll in and out of the water. The top will consist of cross pieces of 5/4 pressure treated lumber.I have no idea of the size of the aluminum angle necessary for the weight.Anybody have an idea?

Follow Ups

Re: docks Randy Kimball 20:19:02 9/13/2002 (0)
Re: docks Bill 14:44:43 9/13/2002 (0)

Subject: Re: docks

Comments:: I want to build a 3 foot wide by 70 feet long dock. : My idea was to weld aluminum angle to create 2 pieces each 70' long.I would attach a set of wheels to one end : and a hitch to the other to be able to roll in and out of the water. The top will consist of cross pieces of 5/4 pressure treated lumber.I have no idea of the size of the aluminum angle necessary for the weight.Anybody have an idea?

[ Home ][ Forum Archive ] [ Active Engineering Forum ]