alum threads stripping
	Post Reply		Forum

Posted by: sheridan ® atho 05/13/2003, 12:30:28 Author Profile Mail author Edit

I need to know the torque allowance for a 6/32 tapped hole with a depth of 13mm in alum.

Replies to this message

Re: alum threads stripping
Re: alum threads stripping -- sheridan	Post Reply	Top of thread	Forum

Posted by: Cragyon ® 05/13/2003, 13:29:52 Author Profile Mail author Edit

Check out the following page on engineers edge. /torque.htm   We use a standard torque of 10 in-lbs for a stainless fastener in aluminum (6061-T651), assuming 1.5 D thread engagement.

Post Reply | Recommend | Alert

Rate

Where am I? Original Top of thread

Previous |   |