Replies to this message

Re: renk seals
: renk seals -- jnb	Post Reply	Top of thread	Engineering Forum

Posted by: Kelly Bramble ® 08/03/2006, 15:42:25 Author Profile eMail author Edit

What is the parts selaing configuration? Does it ride against a rotating shaft? Static?

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

| |

Re: Re: renk seals
: Re: renk seals -- Kelly Bramble	Post Reply	Top of thread	Engineering Forum

Posted by: jnb ® 08/03/2006, 16:06:37 Author Profile eMail author Edit

i believe it's a floating labyrinth seal, with baffles. i'm not sure, i have a manual, but it covers several types. we are coming down tonite, and having a rep come in to help us figure it out. the rep has said that it might take a few trys before it will seal. i think that's unaceptable. we have already had a fire in our exciter because of the oil leaking. do you have a machine with this type of seal, and have you had any trouble with it. thanks

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

| |

renk seals
: Re: Re: renk seals -- jnb	Post Reply	Top of thread	Engineering Forum

Posted by: DPS ® 07/20/2009, 11:09:36 Author Profile eMail author Edit

Have you had success with your seal? Have you ever heard rumbling from the turning gear?

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

|   |