Tube Pipe Circumference Butt Weld With Torque Joint Calculation
The following equations will determine the circumeferential stress applied to a a welded joint under going torque loadings.
Circumference Butt Weld Stress with Torque Shear Stress
| Where: | |
|
|
= Shear stress [MPa,psi] |
|
u |
= Constant Metric units u=1000 Imperial units u=12 |
| W | = Section modulus throat area [mm3, in3] |
|
T |
= Torque applied [Nm, lb-ft] |
Comparative Stress
| Where: | |
|
|
= Comparative stress [MPa,psi] |
 |
= Shear stress [MPa,psi] |
 |
= Conversion coefficient of weld joint |
Link to this Webpage:
© Copyright 2000 -
2024, by Engineers Edge, LLC
www.engineersedge.com
All rights reserved
Disclaimer |
Feedback
Advertising
| Contact
